top of page

ART300 amplifiers 

Pair: $40,000.00

Single: $20,000.00

 

In celebration of their 40th anniversary, conrad-johnson has introduced a new ART amplifier: the ART300 mono-block amplifier.

 

These amplifiers are designed for conrad-johnson's own reference use as well as for industry professionals and dedicated audiophiles. As with previous anniversary products, these amplifiers will be offered as limited editions, with just 125 pairs of the ART300 to be sold through selected conrad-johnson dealers and distributors.

 

The ART300 amplifiers embrace our firm belief that the surest path to both state-of-the-art musicality and exceptional reliability is to keep the circuits simple and build them with the finest available parts.

 

The audio circuit of these amplifiers has just three elements, each as simple as possible, and each essential to the operation of the amplifier. A voltage gain amplifier (a single triode) is direct-coupled to a cathode coupled phase inverter (each phase handled by a single triode), which in turn drives the output stage. Power is developed by KT150 output tubes, chosen for their musical accuracy, high power, and reliability.

 

Two pairs are used to produce 300 Watts in the mono ART300. A small amount (about 12 dB) of loop negative feedback reduces distortion and achieves a sufficiently high damping factor to control reactive loudspeaker systems. To assure continued peak performance, the owner need only make a simple bias adjustment when new tubes are installed. Built-in LED bias indicators allow the user to make this adjustment using only the supplied adjustment tool.

 

Separate, low impedance, discrete dc power supply regulators are provided for the input and phase-inverter stages, thoroughly isolating these stages from the power demands of the output stage. These power supplies are designed to maintain a rock solid supply at all audio frequencies.

 

The ART300 amplifiers maintain the exacting quality standards for which conrad-johnson is internationally known.

 

Resistors are precision laser-trimmed metal foil types. CJD Teflon dielectric capacitors are used for coupling the inverter stage to the output stage, and to bypass the large value polypropylene capacitors in the regulated power supplies. Proprietary wide-bandwidth output transformers contribute to excellent high frequency performance.

 

Even the machined gold plated OFC connectors and the internal wiring have been carefully selected for optimal sonic performance. Attention to every detail enables conrad-johnson to extract the full potential from their circuit designs and ensures that their products will perform to this potential for years to come. The ART300 is built without compromise to achieve a new standard in musical performance, and it is built to last.

conrad-johnson ART300 Mono Power Amplifier (Pair)

$40,000.00Price
Color: Gold
Expected to ship within 3-5 business days from product's arrival to our warehouse.

Power: ART300 Amplifier

300 Watts rms from 30 Hz to 15 KHz at no more than 1.5 % THD into 4 ohms (also available connected for 16 ohm loads)

Sensitivity

1.0V rms to rated power

Frequency Response (at 10 watts)

20 Hz to 20 kHz, +/- .25 dB

Hum and Noise

108 dB below rated power

Input Impedance

100 kOhms

Tube Complement
ART300 – 2 x 6922, 4 x KT150

Dimensions

16.3125D x 19W x 8.75H inches

Weight
ART300 73 lbs.