Suspended Audiophile Turntable with 9cc EVO Tonearm & Sumiko Amethyst MM Cartridge
DESCRIPTION
6PerspeX SB’s transparent acrylic plinth stands on three height-adjustable TPE-damped aluminum cones and carries the outboard motor and sub-chassis. The sub-chassis (made of Corian) rests on opposing magnets forming a unique suspended design. The sub-chassis suspension system staves off parasitic noise normally caused by conventional spring suspensions. A supplied spirit level allows for easy leveling of sub-chassis & record platter. The quiet-running AC motor unit drives the platter via the belt installed around the platter’s circumference. The motor incorporates an advanced DC-driven motor control that ensures speed stability and offers electronic toggling between 33 & 45rpm.
The resonance-optimized platter is a sandwich construction utilizing a precision-machined MDF plate coated 4mm thick in flat-ground recycled vinyl and a screw-down clamp for optimal record coupling. It runs on an inverted bearing with stainless-steel axle carrying a ceramic ball/plate bearing. The headshell and armtube of the 9cc Evolution tonearm are fashioned from a single piece of carbon fiber. The conical armtube reduces standing wave reflections. The inverted tonearm bearing is comprised of four hardened stainless steel tips in ABEC 7 spec ball races.
Supplied either with a premium Sumiko Amethyst Moving Magnet cartridge, hand-made in Japan by the cartridge experts at Sumiko, it can be ready to play within a few minutes of unboxing. Supplied counterweights are suitable for cartridges weighing between 5 & 14g. Also supplied in the box is our Connect it E RCA-RCA phono cable (with ground) – a semi-balanced, low-capacitance cable with superior shielding that’s optimized to carry the phono signal.
ADDITIONAL INFORMATION
| Weight | 11 kg |
|---|---|
| Dimensions | 36.5 × 46 × 18.3 cm |
| Cartridge | None, Superpack (Amethyst) |
Features
- Acrylic Plinth
- Sub-chassis made from Corian with magnetic suspension
- Acoustically inert sandwich construction of platter (vinyl-coated MDF)
- Inverted main bearing with ceramic ball/plate
- Belt drive with AC motor using DC-driven AC generator
- Electronic speed control with 33/45 rpm switching
- 9cc Evolution pre-mounted 9″ tonearm
- Tonearm bearings with ABEC 7 ballraces
- Handmade in Europe
Specs
- Nominal speeds: 33/45 r.p.m.
- Speed variance: ±0,1%
- Wow and flutter: ±0,06%
- Signal to noise: 73dB
- Effective tonearm mass: 8g
- Effective tonearm length: 9″ (230mm)
- Overhang: 18mm
- Power consumption: 6W max / <0,3W standby
- Outboard power supply: 15V DC / 800 mA AC, 90-264V AC, 47 – 63Hz
Pro-Ject 6PerspeX SB Suspended Turntable
- Speeds: 33/45rpm (electronic speed change)
- Principle: belt drive
- Platter: 300mm MDF/vinyl sandwich
- Main bearing: inverted stainless steel with ceramic ball/plate
- Wow & flutter: +/- 0.06% (33rpm), +/- 0.06% (45rpm)
- Speed variance: +/- 0.10% (33rpm), +/- 0.10% (45rpm)
- Signal/noise ratio: 73dB
- Tonearm: EVO 9 CC, one-piece carbon fiber tube
- Effective arm length: 230mm
- Effective arm mass: 8.0g
- Overhang: 18.0mm
- Tracking force range: 10-35mN (1-3.5g)
- Included: 15V DC 800mA power supply, dust cover
- Power consumption: 6W max / <0.3W standby
- Dimensions (WxHxD): 460 x 183 x 365mm
- Dimensions (standard): 18.11 x 7.20 x 14.37″
- Mass (weight): 11.0kg (24.25 lbs)net
