Used McIntosh MA252 Integrated Amplifier for sale
- Excellent condition!
- Remote included
- Original packaging included
-----
- Type: Hybrid Drive
- Vacuum Tube Preamplifier and Solid State Power Amplifier
- 100 Watts x 2-Channels into 8 Ohms
- 160 Watts x 2-Channels into 4 Ohms
- Power Guard®, Sentry Monitor™, Monogrammed Heatsinks™
- 4 analog inputs
- Bass and Treble tone controls
The MA252 Integrated Amplifier is the first hybrid integrated amplifier from McIntosh. Taking retro design cues from the legendary McIntosh MC275 Vacuum Tube Amplifier, the MA252 combines the best of vacuum tube and solid state circuit design to create an amplifier that’s both visually and sonically stunning.
This beautifully crafted integrated amplifier includes our Hybrid Drive™ technology that uses the best of vacuum tubes and solid state to produce the best sound performance. The preamplifier stage uses two 12AX7a and two 12AT7 vacuum tubes housed inside stylish protective cages; the output stage is a direct coupled solid state amplifier that delivers 100 Watts per channel into 8 Ohm speakers or 160 Watts per channel into 4 Ohm speakers. An all analog design, it comes with 2 unbalanced, 1 balanced and 1 Moving Magnet phono input for turntables. All 4 inputs can be given user-friendly names in order to simplify user control. Bass and treble tone controls help fine tune your music to your personal preferences. A full range subwoofer output is included for use with a powered subwoofer to further enhance low frequencies.
The MA252 features our McIntosh Monogrammed Heatsinks™ which are connected to advanced high current output transistors. These transistors eliminate the typical amplifier warm-up time so that the MA252 is in peak operating condition from the moment it’s turned on. A powerful control microprocessor is used for smooth system operation, along with some of the latest audio-grade circuit components that deliver the best possible sound.
Thanks to its solid state output, the MA252 is our first product containing vacuum tubes to include our patented Power Guard® technology. Power Guard monitors the output signal for signs of over driving and makes real time micro adjustments to the input signal to prevent harsh sounding clipping that could potentially damage your speakers. If Power Guard is activated, the 2 vacuum tubes connected to the affected audio channel(s) will flash an amber color; they will return to their normal green color when the clipping has stopped.
Other McIntosh technologies found in the MA252 include Sentry Monitor™, High Drive headphone amplifier and gold-plated speaker binding posts. Input selection, bass, treble, tone bypass, balance and input offset levels can be adjusted using the front panel knobs or the included remote control; all settings and input selection will be shown on the OLED display. The entire unit sits atop a beautiful polished stainless steel chassis with a classic McIntosh-styled die cast aluminum name badge attached to each side.
Electronic Specifications
FTC Power Output Rating
100 W
Power Output per Channel
100 W into 8 ohms
160 W into 4 ohmsNumber of Channels
2
Rated Power Band
20Hz to 20kHz
Total Harmonic Distortion
0.03%
Dynamic Headroom
1.8dB
Frequency Response +0,-0.5dB
20Hz to 20kHz
Frequency Response, +0, -3dB
10Hz to 100kHz
Sensitivity (Phono)
Moving Magnet: 3.0mV
Sensitivity High Level (Balanced / Unbalanced)
0.6V/0.3V
Signal To Noise Ratio (Phono)
Moving Magnet: 80dB
Signal To Noise Ratio (High Level)
97dB
Input Impedance (Balanced / Unbalanced)
20K/20K
Damping Factor
8 ohms: >200
4 ohms: >100Maximum Output
8V Unbalanced
Connectivity
Balanced Input
1
Unbalanced Input
2
Phono Input
1 Moving Magnet (fixed loading)
Headphone Output
1/4" High Drive
Subwoofer Output
1 (mono)
Unbalanced Analog Connector Type
Standard
Speaker Binding Post Type
Standard
Control
Tone Controls
Bass and Treble
Tone Bypass and Input Assign
Yes
RS232 Control Inputs
No
Power Control Outputs
1
Rear Panel Data Ports
1
Rear Panel IR Sensor Inputs
No
Input Level Match
Yes
General Specifications
Vacuum Tube or Solid State
Preamplifier: Vacuum Tube
Power Amplifier: Solid StateOutput Type
Direct Coupled
Output Meters
No
Dual Layer Chassis
Yes
Chassis Finish
Polished stainless steel
McIntosh Monogrammed Heatsinks™
Yes
Power Requirement
120V 50/60Hz, 3.7A
Standby Power Requirement
<0.5 Watts
Weights & Dimensions
Unit Dimensions (W x H x D)
12" (30.5cm) x 7-5/8" (19.4cm) x 16-1/2" (41.9cm)
Unit Weight
28 lbs (12.7 kg)
Shipping Weight
37 lbs (16.8 kg)

































